Drives

B3600 Series – Variable Speed Brushless Drive

The B3605S & B3610S are single-quadrant PWM speed drives for commutating and controlling three-phase brushless motors. The B3600 performs closed loop velocity control via the motor Hall effect devices.

The B3605S & B3610S are suitable for a wide variety of commercial and light industrial applications such as pumps, actuators, blowers & fans, fluid metering, textile machinery and mixing equipment and where a single direction control is needed.

The drive is a single board (2.0 x 3.5 x 0.955 in) which requires a single DC Supply Input of 12 or 15 – 36 Vdc (jumper selectable) in 5 and 10 amp models. Speed can be controlled via on-board trimpot, external POT or external 0-5 Vdc command. Direction of rotation option can be preset or controlled externally.

BMC Series Brushless Servo Drives

The economical and compact BMC Series are analog 4 quadrant brushless servo drives with +/- 10 Vdc command input. All models are designed with protection against over-current, over-heating, and short circuit across motor, ground, and power leads. All models interface with digital controllers or can be used as stand-alone drives.

The BMC6C & BMC7D require DC power supply and the BMC12L & BMC12H operates directly off line. They are switch configurable units for 3 standard configurations – torque, velocity, and open loop control.

DMC Series Brush Servo Drives

The economical and compact DMC Series are analog 4 quadrant brush servo drives with +/- 10 Vdc command input. The DMC series are available in 2 models.

A single red/green LED indicates operating status. All models are designed with protection against over-current, over-heating and short circuit across motor, ground and power leads. Both models interface with digital controllers or can be used as stand-alone drives.

The DMC require DC power supply. They are switch configurable units for 4 standard configurations – torque, velocity, voltage and IR compensation model.